top of page
Creality K1 3D Printer

Creality K1 3D Printer


Creality K1 3D Printer is 12 times faster than a regular FDM 3D printer. , Crazy 600mm/s*. Now, sit tight for the thrill of breathtaking speed.


  • Fast, in an Epic Way :

Crazy 600mm/s*. K1 is 12 times faster than a regular FDM 3D printer. Now, sit tight for the thrill of breathtaking speed.
*The 600mm/s speed is achieved at Creality Lab in the Surface Mode with 0.1mm layer height.
*The typical speed is 300mm/s. The travel speed is 800mm/s.

K1, with its stunning speed, will kindle people’s zeal for 3D printing. A fast speed cuts printing time and raises efficiency. It uses less energy for the same output, thus more eco-friendly. Most importantly, it focuses on the pure joy of creation.

  • Always Print at Full Speed :

With 20000mm/s² acceleration, K1 ramps up to 600mm/s in only 0.03s, delivering full speed in 90% of the printing time.

  • Model Cooling by Dual Fans :

A large fan on the printhead with air ducts cools the model directly. An 18W auxiliary fan in the build chamber enhances the cooling effect, too.

  • Cooling Effect Comparison :

The model hardens before any stringing and warping could happen. It allows support-free bridges and overhangs.

  • Flexible Build Plate :

Sticky and heat-resistant, it works well with a wide range of filaments. The finely frosted surface makes the model bottom fine and smooth. Bendable for quick print removal.

  • Print Right out of the Box :

K1 is assembled and calibrated before shipment and offers a boot-up quick guide. Just start printing the moment your K1 arrives.

  • Self-test with One Tap :

Give a tap, and K1 will self-test the extruder, heatbed, camera (optional), fan, leveling, etc. Any abnormality detected will prompt on the display. So, users can proceed confidently without hitch.

  • Hands-free Auto Leveling :

An array of strain sensors are embedded in the heatbed to generate an accurate leveling mesh. The whole process happens on its own after the printing starts. You don’t need to lift a finger or pay any attention.

  • Stand Firmly to the Speed Challenge :

The unibody die-cast aluminum alloy frame of K1 is CNC machined to be precise and rigid. It enables steady printing at high speed. And the print quality is excellent the whole time.

  • Quick-heating Heatbed :

The aluminum alloy heatbed spreads heat uniformly and quickly. It reaches 60℃ in only 180s.

Connected and Carefree Control :

K1 can print via USB drive or WiFi. With a network connection, K1 can be controlled or monitored* remotely from Creality Print or Creality Cloud APP/WEB. Cluster control is also allowed when many K1 printers are online. Once the printing is complete or abnormal, a notice will be sent to your phone or PC.  No more close watch.

  • No Ringing at High Speed :

A G-sensor in the printhead measures the resonance frequencies of high-speed printing, and auto-tune the printer to mitigate it. No more ghosting or ringing on the print.

  • Delicate Texture without Z-banding :

The upgraded Z-axis with more accurate positioning reduces Z-banding effectively. The texture has never been so subtle.


Printing Technology: FDM

Build Volume: 220*220*250mm

Product Dimensions: 355*355*480mm

Package Dimensions: 415*415*550mm

Net Weight: 12.5kg

Gross Weight: 16kg

Printing Speed: ≤600mm/s

Acceleration: ≤20000mm/s²

Printing Accuracy: 100±0.1mm

Layer Height: 0.1-0.35mm

Extruder: Dual-gear direct drive extruder

Filament Diameter: 1.75mm

Nozzle Diameter: 0.4mm(compatible with 0.6/0.8mm)

Nozzle Temperature: ≤300℃

Heatbed Temperature: ≤100℃

Build Surface: Flexible build plate

Leveling Mode: Hands-free auto leveling

File Transfer: USB drive, WiFi

Display Screen: 4.3″ color touch screen

AI Camera: Optional

AI LiDAR: Optional

Power Loss Recovery: Yes

Filament Runout Sensor: Yes

Input Shaping: Yes

Lighting Kit: Yes

Sleep Mode: Yes

Rated Voltage: 100-120V~, 200-240V~, 50/60Hz

Rated Power: 350W

Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF

Printable File Format: G-Code

Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer

File Formats for Slicing: STL, OBJ, AMF

UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese

bottom of page