top of page
Creality CR-10 SE

Creality CR-10 SE

  • Solid Foudation for Print Quality

The first layer printed by CR-10 SE 3D Printer is neat, firm, and uniform. lt is meant to take the print quality and success rate to a new level.

  • Hands-free Leveling to Get Ideal First Layer

CR-10 SE uses both a CR Touch and a strain sensor to do leveling and Z offset automatically the first time it is powered on. It delivers an excellent first layer without you lifting a finger.

  • Linear Rails, Precise and Durable

The precise linear rails on the X and Y-axis have carriage slides containing ball bearings, making each move accurate, steady, and frictionless (0.04 friction coefficient*). Built out of stiff bearing steel, they will stay as new even after long-time use.

  • Effective Model Cooling Fan

A 12000rpm fan sends a strong wind via a U-shaped air duct to cool the freshly printed model section from three sides. It improves the bridges and overhangs significantly and makes the details more vivid.

  • Hands-free Auto Leveling
  •  Linear Rails at X & Y-Axis
  •  Dedicated Model Cooling Fan
  •  600mm/s High-speed Printing
  •  Input Shaping
  •  Hotend with 60W Ceramic Heater
  •  Compatible with Diverse Filaments
  •  Rich DIY Accessories


Build Volume: 220*220*265mm
Leveling Mode: Auto leveling
Product Dimensions: 490*470*625mm
Display Screen: 4.3″ touch screen
Printing Speed: ≤600mm/s (Data from printing test with Hyper PLA)
Mainboard: 32-bit mainboard
Acceleration: 8000mm/s²
Connectivity: USB drive, WiFi
Printing Accuracy: 100±0.1mm
Printable File Format: G-code
Layer Height: 0.1-0.35mm
Power Loss Recovery: Yes
Filament Diameter: 1.75mm
Filament Runout Sensor : Yes
File Transfer: USB drive, LAN printing, cloud printing
Lighting Kit: Yes
Nozzle Diameter: 0.4mm (default)
AI LIDAR: Optional
Build Surface: Flexible build plate
Camera: Optional
Nozzle Kit Heatbreak: copper + titanium alloys Nozzle: hardened steel
Rated Voltage: 100-120V~, 200-240V, 50/60HZ
Nozzle Temperature: ≤300°C
Rated Power: 350W
Heatbed Temperature: ≤110°C
Slicing Software: Creality Print, Cura, Simplify3D, PrusaSlicer
Extruder: “Sprite” direct drive extruder
Formats for Slicing: STL, OBJ, 3MF, STEP
Supported Filaments: PLA, PETG, PET, TPU, PLA Wood, ABS, ASA, PA, PLA-CF
UI Languages: English, Español, Deutsche, Français, Pyсckий, Português, Italiano, Türk

bottom of page